A3000 Owl

Based on that early Acorn and BBC collaboration, this skin uses the Owl Logo printed on ancient computer ivory colour to match your Archimedes computer.
RISCOSbits ROSkins

Phoebe

The machine that never was… but now it can be! Sort of! We’ve all wanted that garish yellow case on our desk, full of working electronics. Well, let’s have the mini version then!
RISCOSbits ROSkins RISCOSbits ROSkins

RiscPC

Remember that revolutionary case? This is a pictorial representation of that case that you can add to your Pi to remind you of that superb twenty year old machine that cost about £1200 more than the little board inside your plastic case!
Acorn and RISC OS Spares and Extras
Acorn and RISC OS Spares and Extras
Acorn and RISC OS Spares and Extras
ROOL Raspberry Pi for Pi Zero RiscPC for Pi Zero FRAK! for Pi Zero Phoebe RiscPC2 for Pi Zero A3000 Owl for Pi Zero PiNuts Cut-and-fold cardboard cases for your Raspberry Pi SkidLids Vinyl stick on lid for the official Raspberry Pi case, and the OneNine Design cases ROSkins Vinyl stick on lid -and-side skinsfor the official Raspberry Pi and OneNine Design cases Zero Skins Special slimline stick on vinyl lids for the  official Raspberry Pi Zero case.
Pi-Top v1 Slice  A RISC OS style acrylic slice for the Pi-Top v1. Simply replace the existing slice with a new cog logo to demonstrate your commitment to your favourite Pi-Top operating system. Ordinarily available in opaque black with the RISC OS cog etched into the acrylic, other colours and custom engraving is possible.   Standard Slice only £11.50. Buy now on eBay!   Custom Slice - Please contact us so we can design your custom slice for you! We have over 50 colours to choose from, and can engrave a special message, logo or design on the slice, making it a unique gift for the discerning Pi-Top user. Pi-Nuts  A not-so-clever play on the word Punnets but with an Acorn / RISC OS twist! These cut-fold-stick cases for your RISC OS Raspberry Pi are as easy to make as a Blue Peter Rocket and can help your desk a bit brighter and full of nostalgia! So cheap and cheerful, we insist you buy them in bundles of five, and you can choose from five of the same, five different, or any other combination. Once purchased, we’ll even send the template so you can create your own!  Only £5 for any five, including postage! Buy now on eBay!.

A3000 Owl

Based on that early Acorn and BBC collaboration, this skin uses the Owl Logo printed on ancient computer ivory colour to match your Archimedes computer.

Elite

Possibly the most iconic BBC, Archimedes and RiscPC game ever, use this skin to remind you of the hours you wasted traversing the galaxy.

Frak!

If you used a BBC or maybe a later Archimedes, chances are you’ll remember helping Trogg knock the lovable Scrubbly, Hooter and Poglet off their platforms. Well, Scrubbly is back with a vengeance!

ROOL Abstract

Based on the RISCOSOpen Ltd backdrop, your payment for this includes a donation to RISCOSOpen towards further development of the OS.
RISC OS PiNuts ROOL Abstract

RiscPC

Remember that revolutionary case? This is a pictorial representation of that case that you can add to your Pi to remind you of that superb twenty year old machine that cost about £1200 more than the little board inside your cardboard box!
RISC OS PiNuts RiscPC

ROOL Pi

Based on the BootFX screen on the Pi version of RISC OS, this version enables RISCOSbits to make a donation towards the further development of RISC OS.
RISC OS PiNuts ROOL Pi

Archie

Remember the days of using the Archimedes machine to run RISC OS? This case will remind you in all its blue glory!
RISC OS PiNuts Archie

RPC Logo

A classic logo that never appeared on any machines but is fondly remembered by many. Add it to your Raspberry Pi today!
RISC OS PiNuts RPC Logo

Phoebe

The machine that never was… but now it can be! Sort of! We’ve all wanted that garish yellow case on our desk, full of working electronics. Well, let’s have the mini version then!
RISC OS PiNuts A3000 Owl RISC OS PiNuts Elite RISC OS PiNuts Frak! RISC OS PiNuts Phoebe Skid Lids  These are the same as the vinyl skins, but without the side panels and aren’t machine cut - you will need a sharp knife and a steady hand! The advantage is that these can be trimmed to fit other cases as required, so long as they are smaller than the outer dimensions of the Official Raspberry Pi case  Only £5 including postage! Buy now on eBay!

A3000 Owl

Based on that early Acorn and BBC collaboration, this skin uses the Owl Logo printed on ancient computer ivory colour to match your Archimedes computer.

Frak!

If you used a BBC or maybe a later Archimedes, chances are you’ll remember helping Trogg knock the lovable Scrubbly, Hooter and Poglet off their platforms. Well, Scrubbly is back with a vengeance!

ROOL Abstract

Based on the RISCOSOpen Ltd backdrop, your payment for this includes a donation to RISCOSOpen towards further development of the OS.
RISC OS Skid Lids ROOL Abstract

Elite

Possibly the most iconic BBC, Archimedes and RiscPC game ever, use this skin to remind you of the hours you wasted traversing the galaxy.

ROOL Pi

Based on the BootFX screen on the Pi version of RISC OS, this version enables RISCOSbits to make a donation towards the further development of RISC OS.
RISC OS Skid Lids ROOL Pi RISC OS Skid Lids A3000 Owl RISC OS Skid Lids Frak! RISC OS Skid Lids Elite

Archie

Remember the days of using the Archimedes machine to run RISC OS? This case will remind you in all its blue glory!
RISC OS Skid Lids Archie

RiscPC

Remember that revolutionary case? This is a pictorial representation of that case that you can add to your Pi to remind you of that superb twenty year old machine that cost about £1200 more than the little board inside your plastic box!
RISC OS Skid Lids RiscPC

Phoebe

The machine that never was… but now it can be! Sort of! We’ve all wanted that garish yellow case on our desk, full of working electronics. Well, let’s have the mini version then!
RISC OS Skid Lids Archie RISC OS Skid Lids RPC Logo

RPC Logo

A classic logo that never appeared on any machines but is fondly remembered by many. Add it to your Raspberry Pi today!
ROSkins  This is a small selection of the vinyl skins that are planned and are Acorn and RISC OS themed. They fit the official Raspberry Pi case and the One Nine Design case for the Raspberry Pi. These skins come with top cover and three side panels, machine-cut to the dimensions of the cases.  Only £6 including postage! Buy now on eBay! Zero Skins  The perfect skins for your Raspberry Pi Zero case - small, compact, and a cracking fit for the Official Pi Zero Case. They can probably be cut to adjust to many other cases - at this price, it’s worth experimenting!  Only £4 including postage for all five on a single sheet! Buy now on eBay! Pi-Top Slice for RISC OS