Acorn and RISC OS Spares and Extras
Acorn and RISC OS Spares and Extras
Acorn and RISC OS Spares and Extras
UniqAce - one size fits (nearly) all! The UniqAce is a case that meets nearly all of your RISC OS board housing needs. It comes complete with a universal front plate that allows you to add up to six front USB ports, HDMI and network ports, plus power-in and two audio sockets. With holes in the base that accommodate a Pi, an IGEPv5 or a Wandboard, it’s easy to just attach your board and other components, and then build up the case around it. All the acrylic pieces slot together and then are firmly held in place by industrial but attractive metal bolts, that only need finger-tightening so that you can access the internals easily. At 185mm x 185mm x 53mm, it’s small enough to hide away, but big enough to customise the insides as you wish - easy loosen bolts hold the case together but provide quick access to your board to change your SD ROM, or otherwise tweak your components. It could even be modified to fit a Beagleboard, Pandaboard or even an Pi Zero! UniqAce also has a series of custom front and rear plates so you can avoid much of the internal cabling, available for: Wandboard Quad Raspberry Pi Hard Drive IGEPv5 USB and switch plate Obviously, it’s not quite big enough for a Titanium.
A UniqAce with universal front plate - just supply the cables to connect it up as you want.
Custom Plates
Choose a custom front or rear plate kit for your UniqAce to fit either a Wandboard, an IGEPv5 or a Pi and hard drive, complete with a four-port USB hub that’s built to fit inside.
Like the old RiscPC, the UniqAce can be stacked to add functionality, or just to keep down the footprint of your RISC OS machines on the workspace
Second Slice Kit
£15 £15 £30 £5 UniqAce  RISC OS case for Raspberry Pi, Wandboard and IGEPv5 RETIRED contact us for clearance stock